Negative Peak - Keysight x-series User Reference Manual

Couplings
Initial S/W Revision

Negative Peak

This sets the detector for the currently selected trace to Negative Peak. For each bucket (interval) in the
trace, Negative Peak detection displays the lowest sample within the bucket. The Negative peak detection
is similar to peak detection, but selects the minimum video signal.
Key Path
Example
Couplings
Initial S/W Revision
Copy/Exchange
This menu lets you copy any trace to any other trace, or exchange any trace with any other trace.
The X Axis settings and domain of a trace go with it when it is copied or exchanged.
Key Path
Initial S/W Revision
From Trace
Selects the trace to be copied to or exchanged with the To Trace.
Key Path
Preset
State Saved
Initial S/W Revision
To Trace
Selects the trace to be copied from or exchanged with the From Trace.
Key Path
Preset
EMI Receiver Mode Reference
Selecting a detector for a trace (pressing the key or sending a [:SENS]:FSC:DET:TRAC command) puts
Update On and Display On for that trace, even if that detector was already selected.
A.07.00
Trace/Detector, Detector
FSC:DET:TRAC2 NEG Sets the detector to peak for trace 2.
Selecting a detector for a trace (pressing the key or sending a [:SENS]:FSC:DET:TRAC command) puts
Update On and Display On for that trace, even if that detector was already selected.
A.07.00
Trace/Detector
A.07.00
Trace/Detector, Copy/Exchange
1
Saved in instrument state.
A.07.00
Trace/Detector, Copy/Exchange
2
8 Frequency Scan Measurement
Trace/ Detector
585