Edit Register Names - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Recall
Look In
The Look In field shows the path from which the file will be recalled and allows you to change the path
using the up and down arrow keys to navigate to other paths; the Enter key to open a directory; and the
Backspace key to go back one directory. The Look In field first uses the last path from the Save As dialog
Save In: path for that same file type. There is no softkey for directly navigating to the Look In field, but you
can use the left tab to get here from the File/Folder List.
User specified paths are remembered when you leave and return to a Mode and are reset back to the
default using Restore Mode Defaults.
Sort
Accesses a menu that enables you to sort the files within the File Open dialog. Only one sorting type can be
selected at a time and the sorting happens immediately. The sorting types are By Date, By Name, By
extension, and By Size.
Files of Type
This field shows the file suffix for the type of file you have selected to recall. For example, if you navigated
here while recalling State, "Mode state (*.state)" is in the field. If you navigated here while recalling Trace,
""Mode state (*.trace)" is in the field. If you navigated here while importing a trace data file, "Trace Data
(*.csv)" is in the field. For some file types, there is more than one choice in the dropdown menu, which you
can select by using the up and down arrow keys and Enter.
Up One Level
This key corresponds to the icon of a folder with the up arrow that is in the tool bar of the dialog. When
pressed, it causes the file and folder list to navigate up one level in the directory structure. The Backspace
key does the same thing.
Cancel
This key corresponds to the Cancel selection in the dialog. It causes the current Open request to be
cancelled. The ESC key does the same thing.
Key Path
Notes
Initial S/W Revision

Edit Register Names

You may enter a custom name on any of the Register keys, to help you remember what you are using that
state to save. To do this, press the Edit Register Names key, choose the register whose name you wish to
edit, and then enter the desired label using the Alpha Editor or an external PC keyboard.
The maximum number of characters that can be added is 30. In most cases, 30 characters will fit on two
lines of the key.
For more information and the SCPI command, see Edit Register Names under the Save, State function.
526
Recall, State
Brings up the Open dialog for recalling a State Save Type
Prior to A.02.00
EMI Receiver Mode Reference