Tds Alignment - Keysight x-series User Reference Manual

Dependencies
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
Dependencies
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
Dependencies
State Saved
Initial S/W Revision

TDS Alignment

This function only appears in the MXE and this TDS alignment includes AlignNowAll and RFPresel
alignment. Immediately executes an alignment of the TDS subsystem. The instrument will stop any
measurement currently underway, perform the alignment, and then restart the measurement from the
beginning (similar to pressing the Restart key).
Align TDS can be interrupted by pressing the Cancel (ESC) front-panel key or from remote with Device
Clear followed by the :ABORt SCPI command. When this occurs, no new TDS alignment data will be
employed.
EMI Receiver Mode Reference
In models that do not include NFE, this command is not enabled and any attempt to set or query will
yield an error.
No
A.14.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:NFLoor?
:CAL:TEMP:NFL?
Value is the temperature of the last successful Characterize Noise Floor was executed. Returns "" if
no Characterize Noise Floor has ever been performed on the instrument.
In models that do not include NFE, this command is not enabled and any attempt to set or query will
yield an error.
No
A.14.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:ELAPsed:NFLoor?
:CAL:TIME:ELAP:NFL?
Value is the elapsed time the instrument was powered-on since the last successful Characterize
Noise Floor was executed. Returns "" if no Characterize Noise Floor has ever been performed on the
instrument.
In models that do not include NFE, this command is not enabled and any attempt to set or query will
yield an error.
No
A.14.00
6 System Functions
System
321