Edit Header - Keysight x-series User Reference Manual

Initial S/W Revision

Edit Header

This key is only available in the Disturbance Analyzer measurement. It enables you to edit the
measurement results header information.
Key Path
Initial S/W Revision
Title
Provides a title of Meas Result file with a maximum length up to 100 characters. The descriptions will be
stored in the exported Meas Result file as the title and can be displayed in the active function area by
selecting them as the active function.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Client
Provides the Client information with a maximum length up to 100 characters. The descriptions will be
stored in the exported Meas Result file as the Client field and can be displayed in the active function area
by selecting them as the active function.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
If the save is initiated via SCPI, and the file already exists, the file and the directory will be
overwritten.
Using the C: drive is strongly discouraged, since it runs the risk of being overwritten during an
instrument software upgrade.
Both single and double quotes are supported for any filename parameter over SCPI.
A.14.00
Save, Export Data,
A.14.00
Save, Export Data, Edit Header
:MMEMory:RESults:TITLe "string"
:MMEMory:RESults:TITLe?
:MMEM:RES:TITL "Advanced Company EMC Report"
"" (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
Saved in instrument state
A.14.00
Save, Export Data, Edit Header
:MMEMory:RESults:CLIent "string"
:MMEMory:RESults:CLIent?
:MMEM:RES:CLI "XYZ Corp Limited"
"" (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
Saved in instrument state
A.14.00
12 Disturbance Analyzer Measurement
Save
1107