Register 1 Thru Register 16 - Keysight x-series User Reference Manual

Key Path
Mode
Dependencies
Initial S/W Revision

Register 1 thru Register 16

Selecting any one of these register keys causes the State of the mode from the specified Register to be
recalled. Each of the register keys annotates whether it is empty or at what date and time it was last
modified. In addition, you can use the Edit Register Names key under Save, State to enter custom names
for each register.
Registers are shared by all modes, so recalling from any one of the registers will cause a mode switch to
the mode that was active when the save to the Register occurred.
Although these 16 registers are the only registers available from the front panel, there are 128 state
registers available in the instrument. Registers 17–128 are only available from the SCPI interface, using
the *RCL command.
After the recall completes, the message "Register <register number> recalled" appears in the message
bar. If you are in the Spectrum Analyzer Mode, and you are recalling a register that was saved in the
Spectrum Analyzer Mode, then after the recall, you will still be in the Recall Register menu. If the Recall
causes you to switch modes, then after the Recall, you will be in the Frequency menu.
If a requested register is empty an error is generated.
Key Path
Example
Range
Readback
Initial S/W Revision
Modified at S/W Revision
Register 1 thru Register 16
Selecting any one of these register keys causes the State of the mode from the specified Register to be
recalled. Each of the register keys annotates whether it is empty or at what date and time it was last
EMI Receiver Mode Reference
Recall, State
All
N9060A–7FP or N9060B–2FP license required to edit the register names. When the feature is not
licensed, sending the SCPI command generates an error, –221,"Settings conflict;Option not
available"
A.11.00
Recall, State
*RCL 1
1–16 from front panel, 1–128 from SCPI
Date and time with seconds resolution are displayed on the key
OR
A custom name of up to 30 characters entered using the Save, State,Edit Register Names key
OR
"(empty)" if no prior save operation has been performed to this register.
Prior to A.02.00
Prior to A.11.00
8 Frequency Scan Measurement
Recall
527