Expand Meters - Keysight x-series User Reference Manual

Preset
Min
Max
Initial S/W Revision

Expand Meters

Monitor Spectrum displays the Spectrum on the left and the Meters on the right. When Expand Meters is
off, the normal view is presented. When Expand Meters is on, the meters display is expanded and large
characters are used, for easy viewing at a distance.
See "Example Views" on page 888
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Freq Scan Graph
Monitor Spectrum can display the trace and graticule from the Freq Scan display. All settings of the Freq
Scan display including the X-axis settings are the same as in the Freq Scan measurement (you must go to
the Freq Scan measurement to change them).
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
100 (Set by Restore Misc Defaults)
0
100
Prior to A.02.00
View Dsiplay
:DISPlay:MONitor:VIEW:EXPand:METer[:STATe] ON|OFF|1|0
:DISPlay:MONitor:VIEW:EXPand:METer[:STATe]?
DISP:MON:VIEW:EXP:MET OFF
DISP:MON:VIEW:EXP:MET?
OFF
Saved in instrument state
A.13.00
View Dsiplay
:DISPlay:MONitor:VIEW:FSCan[:STATe] ON|OFF|1|0
:DISPlay:MONitor:VIEW:FSCan[:STATe]?
DISP:MON:VIEW:FSC OFF
DISP:MON:VIEW:FSC?
OFF
Saved in instrument state
A.14.00
10 Monitor Spectrum Measurement
View/Display
887