By Detector Amptd - Keysight x-series User Reference Manual

Example
Initial S/W Revision

By Detector Amptd

Specifies that the elements in the signal list will be sorted based on the detector amplitude.
Key Path
Example
Initial S/W Revision
By Det Amptd Type
Specifies how the signal list will be sorted based on the detector amplitude type.
Key Path
Remote Command
Example
Dependencies
Preset
State Saved
Range
Initial S/W Revision
By Δ Detector
Specifies that the elements in the signal list will be sorted based on the detector vs limit delta.
Key Path
Example
Initial S/W Revision
By Δ Detector Type
Specifies how the signal list will be sorted based on the detector to limit delta.
EMI Receiver Mode Reference
CALC:SLIS:SORT:TYPE FREQ
A.13.00
Meas Setup, Signal List, Sort Signals
CALC:SLIS:SORT:TYPE DAMP
A.13.00
Meas Setup, Signal List, Sort Signals, By Detector Amplitude
:CALCulate:SLISt:SORT:DAMPlitude DET1|DET2|DET3
:CALCulate:SLISt:SORT:DAMPlitude ?
CALC:SLIS:SORT:DAMP DET2
CALC:SLIS:SORT:DAMP?
Selecting the detector amplitude type to be sorted (pressing the key or sending the equivalent SCPI
command) will turn on the Auto Sort state, even if that detector amplitude type was already
selected.
DET1
Saved in instrument state
Detector 1|Detector 2|Detector 3
A.13.00
Meas Setup, Signal List, Sort Signals
CALC:SLIS:SORT:DET DLD
A.13.00
10 Monitor Spectrum Measurement
Meas Setup
787