Peak Search - Keysight x-series User Reference Manual

Peak Search

Displays the Peak Search menu and places the selected marker on the trace point with the maximum y-
axis value for that marker's trace. If the selected marker was off, then it is turned on as a normal marker
and a peak search is performed.
Peak Search functionality only applicable to those traces on the current x-axis display range.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
Next Peak
Moves the selected marker to the next highest local maximum with a value less than the current marker's.
If the selected marker was off, then it is turned on as a normal marker and a peak search is performed.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
Min Search
Moves the selected marker to the minimum y-axis value on the current trace. If the selected marker was
off, then it is turned on as a normal marker and a peak search is performed.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
Front-panel key
:CALCulate:DANalyzer:MARKer[1]|2|...|12:MAXimum
CALC:DAN:MARK1:MAX
No
A.14.00
Peak Search
:CALCulate:DANalyzer:MARKer[1]|2|...|12:MAXimum:NEXT
CALC:DAN:MARK:MAX:NEXT
No
A.14.00
Peak Search
:CALCulate:DANalyzer:MARKer[1]|2|...|12:MINimum
CALC:DAN:MARK:MIN
No
A.14.00
12 Disturbance Analyzer Measurement
Peak Search
1077