Mass Storage Move (Remote Command Only) - Keysight x-series User Reference Manual

Initial S/W Revision

Mass Storage Move (Remote Command Only)

Key path
Remote Command
Notes
Initial S/W Revision
Mass Storage Remove Directory (Remote Command Only)
Key path
Remote Command
Notes
Initial S/W Revision
EMI Receiver Mode Reference
This command will generate an "access denied" error if the new directory would be in a restricted
folder (e.g., C:\Windows) and the current user does not have Power User or Administrator privileges.
Prior to A.02.00
SCPI Only
:MMEMory:MOVE <string>,<string>[,<string>,<string>]
The string must be a valid logical path.
Moves an existing file to a new file or an existing directory to a new directory.
Two forms of parameters are allowed. The first form has two parameters. In this form, the first
parameter specifies the source, and the second parameter specifies the destination.
The second form has four parameters. In this form, the first and third parameters specify the source.
The second and fourth parameters specify the directories. The first pair of parameters specifies the
source. The second pair specifies the destination. An error is generated if the source doesn't exist or
the destination file already exists.
This command will generate an "access denied" error if the destination is a restricted folder (e.g.,
C:\Windows) and the current user does not have Power User or Administrator privileges.
Prior to A.02.00
SCPI Only
:MMEMory:RDIRectory <directory_name>
The string must be a valid logical path.
Removes a directory. The <directory_name> parameter specifies the directory name to be removed.
All files and directories under the specified directory shall also be removed.
This command will generate an "access denied" error if the folder is a restricted folder (e.g.,
C:\Windows) or is in a restricted folder and the current user does not have Power User or
Administrator privileges.
Prior to A.02.00
9 Strip Chart Measurement
Save
701