Questionable Integrity Uncalibrated Event Query - Keysight x-series User Reference Manual

Mode
Remote Command
Example
Preset
Min
Max
Status Bits/OPC
dependencies
Initial S/W Revision

Questionable Integrity Uncalibrated Event Query

This query returns the decimal value of the sum of the bits in the Questionable Integrity Uncalibrated Event
register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode
Remote Command
Example
Preset
Status Bits/OPC
dependencies
Initial S/W Revision
Questionable Integrity Uncalibrated Negative Transition
This command determines which bits in the Questionable Integrity Uncalibrated Condition register will set
the corresponding bit in the Questionable Integrity Uncalibrated Event register when the condition register
bit has a negative transition (1 to 0). The variable <integer> is the sum of the decimal values of the bits that
you want to enable.
Mode
Remote Command
Example
EMI Receiver Mode Reference
All
:STATus:QUEStionable:INTegrity:UNCalibrated:ENABle
:STATus:QUEStionable:INTegrity:UNCalibrated:ENABle?
STAT:QUES:INT:UNC:ENAB 1 Oversweep (Meas Uncal) will be reported to the Integrity Summary of
the Status Questionable register.
32767
0
32767
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:INTegrity:UNCalibrated[:EVENt]?
STAT:QUES:INT:UNC?
0
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition <integer>
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition?
STAT:QUES:INT:UNC:NTR 1 Oversweep cleared will be reported to the Integrity Summary of the
Status Questionable register.
3 Programming the Analyzer
STATus Subsystem
133