Auto Preamp - Keysight x-series User Reference Manual

Key Path
Remote Command
Example
Preset
State Saved
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision

Auto Preamp

When ON, Int Premp will be considered in the autorange procedure for meters and Strip Chart.
Key Path
Remote Command
Example
Preset
State Saved
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision
Couple Meters to Signal List
This key is only available when in the Frequency Scan measurement. If this is turned on, the measurement
will automatically couple Frequency (Meters) to the Frequency of the selected signal when the selected
signal is changed.
Key Path
Remote Command
Example
EMI Receiver Mode Reference
Mode Setup, Meters Control, Autorange
[:SENSe]:METer:ATTenuation:AUTO ON|OFF|1|0
[:SENSe]:METer:ATTenuation:AUTO?
:MET:ATT:AUTO 0
:MET:ATT:AUTO?
OFF
Saved in instrument state
INPut[1]|2:ATTenuation:AUTO
This command above is included for ESU compatibility. The suffix [1]|2 are irrelevant to the
measurement, they are added solely for remote language compatibility.
A.10.00
Mode Setup, Meters Control, Autorange
[:SENSe]:METer:GAIN:AUTO ON|OFF|1|0
[:SENSe]:METer:GAIN:AUTO?
:MET:GAIN:AUTO ON
:MET:GAIN:AUTO?
OFF
Saved in instrument state
INPut[1]|2:GAIN:AUTO ON | OFF
This command above is included for ESU compatibility. The suffix [1]|2 are irrelevant to the
measurement, they are added solely for remote language compatibility.
A.10.00
Mode Setup, Meters Control
[:SENSe]:FSCan:SLISt:COUPle:METer ON|OFF|1|0
[:SENSe]:FSCan:SLISt:COUPle:METer?
SENS:FSC:SLIS:COUP:MET 1 Couple Meters to Signal List
5 Mode Functions
Mode Setup
255