Continuous - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup

Continuous

The scan will run continuously until you stop it by pressing the Stop key in the Sweep Control menu.
Key Path
Example
Dependencies
Initial S/W Revision
Search Only
When this key is selected, pressing Start performs a search. See Section
there are no valid peak signals found, an error is generated saying "No peak signals found".
Key Path
Example
Dependencies
Initial S/W Revision
Remote Command
Example
Notes
Scan, Search and Measure
When this key is selected, pressing Start performs a scan, search, and a final measuremen. The scan will
stop automatically and continue to search when the specified # of scans is complete regardless of
Single/Continuous scan setting. See Section
Key Path
Example
Dependencies
Initial S/W Revision
474
Meas Setup, Scan Sequence
FSC:SEQ SCAN
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
Meas Setup, Scan Sequence
FSC:SEQ SEAR
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
:CALCulate[1]|2:PEAKsearch|PSEarch[:IMMediate]
CALC:PEAK
This command is included for ESU compatibility. The suffix [1]|2 is irrelevant to the measurement,
they are added solely for remote language compatibility
This ESU Command is alias to FSC:SEAR:PEAK:COUN:STAT ON; FSC:SEQ SEAR;INIT.
"Scan Sequence" on page 471
Meas Setup, Scan Sequence
FSC:SEQ SSAM
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
"Scan Sequence" on page
for more information.
EMI Receiver Mode Reference
471. If