Comment - Keysight x-series User Reference Manual

Key Path
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision

Comment

Sets an ASCII comment field for each signal in the list, which will be shown in the "Comment" column of
signal list. This value will be stored in signal list exported file.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Limits
Opens the Limit Lines menu that contains keys that control limit lines of the current measurement. Only
the upper limit is used in the Monitor Spectrum measurement.
Key Path
State Saved
Initial S/W Revision
Select Limit
Specifies the selected limit. The term "selected limit" is used throughout this document to specify which
limit will be affected by the functions.
EMI Receiver Mode Reference
Meas Setup, Signal List, Sort Signals
:CALCulate:SLISt:SORT:AUTO ON|OFF|1|0
:CALCulate:SLISt:SORT:AUTO?
CALC:SLIS:SORT:AUTO 1 Turn on auto sorting
CALC:SLIS:SORT:AUTO?
If Scan Sequence is set to Remeasure, signal in the list will only be auto sorted when Remeasure is
completed.
ON
Saved in instrument state
On|Off
A.13.00
Meas Setup, Signal List
[:SENSe]:SLISt:COMMent <integer>,"string"
[:SENSe]:SLISt:COMMent? <integer>
:SLIS:COMM 2, "unknown"
"" (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
Saved in instrument state
A.13.00
Meas Setup
Saved in instrument state
A.13.00
10 Monitor Spectrum Measurement
Meas Setup
789