Keysight x-series User Reference Manual page 544

8 Frequency Scan Measurement
Save
There is one set of 128 state registers in the instrument, not one set for each Mode. When a state is saved,
the Mode it was saved from is saved with it; then when it is recalled, the instrument switches to that Mode.
After the save completes, the corresponding register menu key annotation is updated with the date and
time and the message "Register <register number> saved" is displayed.
Key Path
Mode
Example
Range
Readback
Initial S/W Revision
Modified at S/W Revision
Save As . . .
When you press "Save As", the analyzer brings up a Windows dialog and a menu entitled "Save As." This
menu allows you to navigate to the various fields in the Windows dialog without using a keyboard or
mouse. The Tab and Arrow keys can also be used for dialog navigation.
See "To File . . ." on page 1096
The default path for saving files is:
For all of the Trace Data Files:
My Documents\<mode name>\data\traces
For all of the Limit Data Files:
My Documents\<mode name>\data\limits
For all of the Measurement Results Data Files:
My Documents\<mode name>\data\<measurement name>\results
For all of the Capture Buffer Data Files:
My Documents\<mode name>\data\captureBuffer
Key Path
Mode
Notes
Initial S/W Revision
544
Save, State
All
*SAV 1
1–16 from front panel, 1–128 from SCPI
Date and time with seconds resolution are displayed on the key
OR
A custom name of up to 30 characters entered using the Edit Register Names key
OR
"(empty)" if no prior save operation has been performed to this register.
Prior to A.02.00
A.11.00
in Save, State for a full description of this dialog and menu.
Save, Data
All
The key location is mode-dependent and will vary.
Brings up the Save As dialog for saving a <mode specific> Save Type. The save is performed
immediately and does not wait until the measurement is complete.
Prior to A.02.00
EMI Receiver Mode Reference