Backlight - Keysight x-series User Reference Manual

9 Strip Chart Measurement
View/Display
Flat Color
Selects a format that is best when the screen is to be printed on an ink printer.
Key Path
Example
Readback
Initial S/W Revision
Flat Monochrome
Selects a format that is like Flat Color. But only black is used (no colors, not even gray), and no fill.
Key Path
Example
Readback
Initial S/W Revision

Backlight

Accesses the display backlight on/off keys. This setting may interact with settings under the Windows
"Power" menu.
When the backlight is off, pressing ESC, TAB, SPACE, ENTER, UP, DOWN, LEFT, RIGHT, DEL, BKSP, CTRL,
or ALT turns the backlight on without affecting the application. Pressing any other key will turn backlight on
and could potentially perform the action as well.
Key Path
Remote Command
Preset
Initial S/W Revision
Backlight Intensity
An active function used to set the backlight intensity. It goes from 0 to 100 where 100 is full on and 0 is off.
This value is independent of the values set under the Backlight on/off key.
Key Path
Remote Command
Example
722
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM FCOL
Flat Color
Prior to A.02.00
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM FMON
Flat Mono
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:BACKlight ON|OFF
:DISPlay:BACKlight?
ON (Set by Restore Misc Defaults)
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:BACKlight:INTensity <integer>
:DISPlay:BACKlight:INTensity?
DISP:BACK:INT 50
EMI Receiver Mode Reference