Phase Noise - Keysight x-series User Reference Manual

Phase Noise

The Phase Noise mode provides pre-configured measurements for making general purpose
measurements of device phase noise.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Real Time Spectrum Analyzer
The Real Time Spectrum Analyzer (RTSA) mode provides real-time signal analysis, very high probability-of-
intercept for intermittent signals with appropriate triggers.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Remote Language Compatibility
The Remote Language Compatibility (RLC) mode provides remote command backwards compatibility for
the 8560 series of spectrum analyzers, known as legacy spectrum analyzers.
After changing into or out of this mode, allow a 1 second delay before sending any subsequent commands.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
EMI Receiver Mode Reference
Mode
INST:SEL PNOISE
or
INST:NSEL 14
Prior to A.02.00
Mode
INST:SEL RTSA
or
INST:NSEL 107
A.13.00
Mode
INST:SEL RLC
Or
INST:NSEL 266
Prior to A.02.00
5 Mode Functions
Mode
241