Lan Reset - Keysight x-series User Reference Manual

If this control is entered without an external keyboard or mouse connected, you can cancel the control by
pressing the Cancel (ESC) front-panel key.
Key Path
Mode
Initial S/W Revision
LXI
Opens a menu that allows you to access the various LXI configuration properties.
Key Path
Initial S/W Revision

LAN Reset

Resets the LAN connection.
Key Path
Initial S/W Revision
Device Identification (Remote Command Only)
Enabling the LXI device identification will place the LXI Status Indicator to the 'Identify' state. Disabling the
LXI device identification will place the LXI Status Indicator to the 'No Fault' state. The LXI Status indicator
is in the upper left region of the instrument's graphical user interface (
Mode
Remote Command
EMI Receiver Mode Reference
System, I/O Config
All
Prior to A.02.00
System, I/O Config
Prior to A.02.00
System, I/O Config, LXI
Prior to A.02.00
All
:LXI:IDENtify[:STATe] OFF|ON|0|1
:LXI:IDENtify[:STATe]?
6 System Functions
).
System
337