Scan Table On/Off - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Save
State Saved
Range
Initial S/W Revision

Scan Table On/Off

Enables you to choose whether or not to show Scan Table information in the report.
Key Path
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
Signal List On/Off
Enables you to choose whether or not to show Signal List information in the report.
Key Path
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
Output Format
Enables user to select the output format of Meas Result. If the Output Format is set to HTML, a .html file
will be saved and a directory that contains the .png file for the screen image will be created. If the Output
Format is set to PDF, a .pdf file will be saved.
Key Path
Remote Command
562
Saved in instrument state
Off|Flat Color|3D Color
A.10.00
Save, Data, Meas Result, Scan Table
:MMEMory:RESults:SCAN ON|OFF|0|1
:MMEMory:RESults:SCAN?
:MMEM:RES:SCAN ON
Not part of Preset, but is reset to ON or by Restore Mode Defaults; survives shutdown.
Saved in instrument state
On|Off
A.10.00
Save, Data, Meas Result, Signal List
:MMEMory:RESults:SLISt ON|OFF|0|1
:MMEMory:RESults:SLISt?
:MMEM:RES:SLIS ON
Not part of Preset, but is reset to ON or by Restore Mode Defaults; survives shutdown.
Saved in instrument state
On|Off
A.10.00
Save, Data, Meas Result
:MMEMory:RESults:OUTPut HTML|PDF
:MMEMory:RESults:OUTP?
EMI Receiver Mode Reference