Meters Rbw Lines - Keysight x-series User Reference Manual

10 Monitor Spectrum Measurement
View/Display

Meters RBW Lines

When Meters RBW Lines is turned on, two blue vertical lines appear on the display, equal distances from
the center of the graticule. Their spacing matches the current setting for the Meters RBW as shown below.
If the Meters RBW is wider than the span of the Monitor Spectrum display, these lines are not shown.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Example Views
Below are the views with Expand Meters Off (top) and Expand Meters on (bottom)
888
View Display
:DISPlay:MONitor:RBWLines[:STATe] ON|OFF|1|0
:DISPlay:MONitor:RBWLines[:STATe]?
DISP:MON:RBWL ON
DISP:MON:RBWL?
OFF
Saved in instrument state
A.14.50
EMI Receiver Mode Reference