11 APD Measurement
Meas Setup
Readback
Initial S/W Revision
Probability of Time
Set the Limit APD method to Probability of Time.
Key Path
Example
State Saved
Initial S/W Revision
Disturbance Level (Constant)
Defines the disturbance level where the Probability limit is applies to.
Key Path
Remote Command
Example
Preset
State Saved
Min
Max
Default Unit
Initial S/W Revision
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current point and
becomes the current point. The new point is not yet entered into the underlying table, and the data in the
row is displayed in light gray.
Key Path
Initial S/W Revision
948
10–7
A.13.00
Meas Setup, Limits, APD Method
CALC:APD:LLIN:METH PROB
Saved in instrument state.
A.13.00
Meas Setup, Limits, APD Method, Probability of Time
:CALCulate:APD:LLINe[1]:METHod:PROBability:DLEVel <ampl>
:CALCulate:APD:LLINe[1]:METHod:PROBability:DLEVel?
CALC:APD:LLIN:METH:PROB:DLEV 70
CALC:APD:LLIN:METH:PROB:DLEV?
dBuV
Saved in instrument state.
–250 dBuV
250 dBuV
Depends on the currently selected amplitude axis unit(X Axis).
A.13.00
Meas Setup, Limits, Edit
A.13.00
EMI Receiver Mode Reference