Iden/Widen/Mototalk - Keysight x-series User Reference Manual

5 Mode Functions
Mode

iDEN/WiDEN/MOTOTalk

Selects the iDEN/WiDEN/MOTOTalk mode for general purpose measurements of iDEN and iDEN-related
signals. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
IQ Analyzer (Basic)
The IQ Analyzer Mode makes general purpose frequency domain and time domain measurements. These
measurements often use alternate hardware signal paths when compared with a similar measurement in
the Signal Analysis Mode using the Swept SA measurement. These frequency domain and time domain
measurements can be used to output I/Q data results when measuring complex modulated digital signals.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
ISDB-T
Selects the ISDB-T mode for measurements of digital video signals using this format. There are several
power and demod measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
LTE
Selects the LTE mode for general purpose measurements of signals following the LTE FDD standard. There
are several measurements available in this mode.
238
Mode
INST:SEL IDEN
INST:NSEL 103
A.02.00
Mode
INST:SEL BASIC
INST:NSEL 8
Prior to A.02.00
Mode
INST:SEL ISDBT
INST:NSEL 239
A.03.00
EMI Receiver Mode Reference