Select Marker - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Marker

Select Marker

Specifies the selected marker. The term "Selected marker" is used throughout this document to specify
which marker will be affected by the functions.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
Relative To
Selects the reference marker for a marker in Delta mode.
Key Path
Remote Command
Example
Notes
Couplings
Preset
State Saved
Range
Initial S/W Revision
Marker Trace
Selects the trace that you want your marker to be placed on. A marker is associated with one and only one
trace. This trace is used to determine the placement, result, and X Axis Scale of the marker. All markers
have an associated trace, it is from that trace that they determine their attributes and behaviors, and it is to
that trace that they go when they become Normal or Delta markers.
Key Path
Remote Command
412
Marker, Properties
Front panel only. The selected marker is remembered even when not in the Marker menu and is used
if a Search is done or a Marker Function is turned on.
Marker 1
Saved in instrument state.
A.07.00
Marker, Properties
:CALCulate:FSCan:MARKer[1]|2|...|12:REFerence <integer>
:CALCulate:FSCan:MARKer[1]|2|...|12:REFerence?
CALC:FSC:MARK3:REF 1 Sets marker 3's reference marker to 1 and turns marker 3 on as a delta
marker.
CALC:FSC:MARK3:REF?
A marker cannot be relative to itself so that choice is grayed out, and if sent from SCPI, generates
error –221: "Settings conflict; marker cannot be relative to itself."
When queried, a single value will be returned - the specified marker number's relative marker.
The act of specifying the selected marker's reference marker makes the selected marker a Delta
marker. If the reference marker is off it is turned on in Normal mode at the delta marker location
By default, marker X is relative to marker X+1 except for marker 12, which is relative to marker 1.
Saved in instrument state. Not affected by Marker Off and not affected by Preset or power cycle.
1|2|3|4|5|6|7|8|9|10|11|12
A.07.00
Marker, Properties
:CALCulate:FSCan:MARKer[1]|2|...|12:TRACe 1|2|3
:CALCulate:FSCan:MARKer[1]|2|...|12:TRACe?
EMI Receiver Mode Reference