Sweep Control - Keysight x-series User Reference Manual

Sweep Control

Displays a menu of keys that enable you to control the sweep parameters.
Key Path
Notes
Initial S/W Revision
Pause / Resume
Allows you to pause and resume a measurement. When a measurement is paused, the label of the key
changes to Resume. Press Resume to resume the measurement.
Key Path
Remote Command
Example
Couplings
Initial S/W Revision
Key Path
Remote Command
Example
Couplings
Initial S/W Revision
Stop / Start
Allows you to start and stop the measurement. When the measurement is started, the label of the key
changes to Stop. Press the Start or Restart key to start to run the measurement.
When you start a new measurement, it will delete the disturbance list if the disturbance has any data.
When pressing Start or Restart, if the disturbance list has data, an advisory message will issue a warning.
Key Path
Remote Command
Example
Initial S/W Revision
Coupling
EMI Receiver Mode Reference
Front-panel key
Front panel only.
A.14.00
Sweep/ Control
INITiate:PAUSe
INIT:PAUS
When the measurement is paused, the label on the key changes to "Resume"
A.14.00
Sweep/ Control
:INITiate:RESume
INIT:RES
When the measurement is resumed, the label on the key changes to "Pause"
A.12.00
Sweep/ Control
:INITiate:ABORt
INIT:ABOR
A.14.00
When the measurement is stopped, the label on the key changes to "Pause".
12 Disturbance Analyzer Measurement
Sweep Control
1121