Start/ Stop - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Sweep/ Control
Remote Command
Example
Couplings
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision
Key Path
Remote Command
Example
Couplings
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision

Start/ Stop

Allows you to start the scan, search or final measurement depending on the scan sequence selected.
When started, the label on the key changes to Stop. The meters display would turn off during scanning and
a final measurement. Pressing Stop will stop the current scan sequence and meters detector will be
started automatically.
Key Path
Remote Command
Example
Notes
Couplings
Initial S/W Revision
Key Path
Remote Command
Example
574
:INITiate:PAUSe
INIT:PAUS
When paused, the label on the key changes to "Resume".
:HOLD
The command above is included for ESU compatibility.
A.07.00
Sweep/ Control
:INITiate:RESume
INIT:RES
When resumed, the label on the key changes to "Pause".
:INITiate[1]|2:CONMeas.
This command is included for ESU compatibility. The suffix [1]|2 is irrelevant to the measurement,
they are added solely for remote language compatibility.
A.07.00
Softkey: Sweep/ControlHardkey: Restart
INITiate2:IMMediate
INITiate2:RESTart
INIT2:IMMINIT2:REST
This command is remote language compatible with ESU.
When started, the label on the key changes to Stop.
A.07.00
Sweep/ Control
[:SENSe]:FSCan:SCAN:ABORt
FSC:SCAN:ABOR
EMI Receiver Mode Reference