Delta Marker Y Axis Value - Keysight x-series User Reference Manual

Delta Marker Y Axis Value

Enables you to set the selected marker to Delta mode, and gets the marker Y Axis Values. The output is
always a relative value referred to the reference marker.
Remote Command
Example
Notes
Initial S/W Revision
EMI Receiver Mode Reference
:CALCulate[1]|2:DELTamarker[1]|2|...|4:Y?
CALC:DELT3:Y? Turn on maker 3 in Normal mode and query the Y axis relative value.
This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE DELT; :CALC:APD:MARK[1]|2|3|4:Y?
A.13.00
11 APD Measurement
Marker
925