Measure At Marker Window - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Marker Function
Dependencies
Couplings
Initial S/W Revision

Measure at Marker Window

Pressing this key accesses a menu of keys that enable you to select the state and position of the Measure
At Marker window.
Key Path
Readback
Initial S/W Revision
Window On/Off
Turns the Measure at Marker window on and off. It turns on automatically when a Measure at Marker is
initiated and turns off on a Preset. If the Window is turned on without a Measure at Marker result, --- is
displayed for each result for which the detector is not "Off".
Key Path
Remote Command
Example
Couplings
Preset
State Saved
Range
Readback Text
Initial S/W Revision
Window Position
Enables you to control the placement of the Measure at Marker window on the display.
Key Path
418
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
If the specified Marker is not on, the analyzer turns it on at the center of the screen and does a peak
search before performing the function.
A.07.00
Marker Function
In square brackets, the state of the window then the window position, separated by commas, as [On,
UpperLeft]
A.07.00
Marker Function, Meas at Mkr Window
:DISPlay:FSCan:WINDow:MAMarker[:STATe] ON|OFF|1|0
:DISPlay:FSCan:WINDow:MAMarker[:STATe]?
DISP:FSC:WIND:MAM 0
DISP:FSC:WIND:MAM?
The window turns on automatically when a Measure at Marker is initiated and turns off on a Preset.
OFF
Saved in instrument state
On|Off
On|Off
A.07.00
Marker Function, Meas at Mkr Window
EMI Receiver Mode Reference