Show System Contents (Remote Command Only) - Keysight x-series User Reference Manual

Mode
Example
Backwards Compatibility
Notes
Initial S/W Revision

Show System contents (Remote Command Only)

A remote command is available to obtain the contents of the Show System screen (the entire contents, not
just the currently displayed page).
Remote Command
Example
Notes
Initial S/W Revision
Computer System description (Remote Command Only)
A remote command is available to obtain the Computer System description. The Computer System is the
operating system and patch level as reported by operating system.
Remote Command
Example
Notes
Initial S/W Revision
Hardware
The show hardware screen is used to view details of the installed hardware. This information can be used
to determine versions of hardware assemblies and field programmable devices, in the advent of future
upgrades or potential repair needs.
The screen is formatted into two groupings: product descriptive information and hardware information. The
hardware information is listed in a table format:
EMI Receiver Mode Reference
All
SYST:SHOW SYST
The hardware statistics that are displayed in the PSA Show System screen have been moved to a
dedicated Show Hardware Statistics screen in the Service Menu.
Prior to A.02.00
:SYSTem:CONFigure[:SYSTem]?
:SYST:CONF?
The output is an IEEE Block format of the Show System contents. Each line is separated with a new-
line character.
Prior to A.02.00
:SYSTem:CSYStem?
:SYST:CSYS?
The return value is the Computer System name and service pack level.
Prior to A.12.00
6 System Functions
System
277