12 Disturbance Analyzer Measurement
Meas Setup
30 MHZ
Sets the Frequency to 30 MHz.
Key Path
Example
Readback Text
Initial S/W Revision
Manual
Enables you to set the Frequency.
Key Path
Example
Readback Text
Initial S/W Revision
Key Path
Remote Command
Example
Preset
State Saved
Min
Max
Default Unit
Initial S/W Revision
Terminal
Selects the terminal type of the CISPR limit.
Key Path
Remote Command
Example
1066
Meas Setup, Setup Table, Frequency
DAN:FREQ F30MHZ
30 MHZ
A.14.00
Meas Setup, Setup Table, Frequency
DAN:FREQ MAN
<freq>
A.14.00
Meas Setup, Setup Table, Frequency
[:SENSe]:DANalyzer:FREQuency:MANual <freq>
[:SENSe]:DANalyzer:FREQuency:MANual?
DAN:FREQ:MAN 150 KHz
DAN:FREQ:MAN?
150 KHz
Saved in instrument state
Depends on the instrument minimum frequency.
Depends on the instrument maximum frequency.
Hz
A.14.00
Meas Setup, Setup Table
CALCulate:DANalyzer:LIMit:CISPr:TERMinal MAINS | LOAD | MP1 | MP2 | MP3
CALCulate:DANalyzer:LIMit:CISPr:TERMinal?
CALC:DAN:LIM:CISP:TERM MAINS
CALC:DAN:LIM:CISP:TERM?
EMI Receiver Mode Reference