Noise Figure - Keysight x-series User Reference Manual

5 Mode Functions
Mode

Noise Figure

The Noise Figure mode provides pre-configured measurements for making general purpose
measurements of device noise figure.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Analog Demod
Selects the Analog Demod mode for making measurements of AM, FM and phase modulated signals.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
SCPI Language Compatibility
The SCPI Language Compatibility mode provides remote language compatibility for SCPI-based
instruments, such as the Rohde and Schwartz FSP and related series of spectrum analyzers.
After changing into or out of this mode, allow a 1 second delay before sending any subsequent commands.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
226
Mode
INST:SEL NFIGURE
INST:NSEL 219
Prior to A.02.00
Mode
INST:SEL ADEMOD
INST:NSEL 234
Prior to A.02.00
Mode
INST:SEL SCPILC
Or
INST:NSEL 270
A.06.00
EMI Receiver Mode Reference