Properties - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
When the limits are frequency limits but the trace is a zero-span trace, the limit trace is drawn at the limit
amplitude of the center frequency. When the limits are time limits but the trace is a frequency domain
trace, the limit trace is drawn according to the current time axis, with the left of the screen being 0 and the
right being equal to sweep time.
Key Path
Remote Command
Example
Couplings
Preset
State Saved
Range
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision

Properties

Accesses a menu that lets you set the properties of the selected limit.
Key Path
Initial S/W Revision
Select Limit
Specifies the selected limit. The term "selected limit" is used throughout this document to specify which
limit will be affected by the functions.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
Test Trace
Selects the trace that you want the limit to test. A limit is applied to one and only one trace.
484
Meas Setup, Limits
:CALCulate:FSCan:LLINe[1]|2|...|6:DISPlay ON|OFF|1|0
:CALCulate:FSCan:LLINe[1]|2|...|6:DISPlay?
CALC:FSC:LLIN2:DISP ON
CALC:FSC:LLIN2:DISP?
Limit display ON selects the limit. Testing is done on all displayed limits if Test Limits (All Limits) is
ON. Entering the limit menu from the GUI turns on the selected limit.
OFF
Saved in instrument state.
On|Off
:CALCulate[1]|2:LIMit[1]|2|...|6:STATe
This command above is included for ESU compatibility. The suffix [1]|2 is irrelevant to the
measurement, they are added solely for remote language compatibility.
A.07.00
Meas Setup, Limits
A.07.00
Meas Setup, Limits
Front panel only. The selected limit is remembered even when not in the Limit Menu.
Limit 1, not affected by Mode Preset, preset by Restore Mode Defaults.
Saved in instrument state.
A.07.00
EMI Receiver Mode Reference