Trace Update State (Remote Command Only) - Keysight x-series User Reference Manual

11 APD Measurement
Trace/Detector
Readback Text
Initial S/W Revision

Trace Update State (Remote Command Only)

Toggles the trace update state.
Key Path
Remote Command
Example
Couplings
Preset
State Saved
Initial S/W Revision
Trace Display State (Remote Command Only)
Toggle the trace display state.
Key Path
Remote Command
Example
Couplings
Preset
State Saved
Initial S/W Revision
Reset Exceeded Limit
Resets the Exceeded Limit Trace.
Key Path
Remote Command
Example
Initial S/W Revision
1010
When a View/ Blank selection is made, the menu returns to the previous menu.
Trace On|View|Blank|Background
A.13.00
Trace/Detector
:TRACe[1]|2|3:APD:UPDate[:STATe] ON|OFF|0|1
:TRACe[1]|2|3:APD:UPDate[:STATe]?
:TRAC2:APD:UPD 0 Makes trace 2 inactive (stops updating)
Whenever you set Update to On for any trace, the Display is set to On for that trace.
1|0|0 (On for Trace 1; Off for Trace 2 and 3)
Saved in Instrument State
A.13.00
Trace/Detector
:TRACe[1]|2|3:APD:DISPlay[:STATe] ON|OFF|0|1
:TRACe[1]|2|3:APD:DISPlay[:STATe]?
:TRAC2:APD:DISP,1 Makes trace 2 visible
:TRAC3:APD:DISP,0 Blanks trace 3
Whenever you set Update to On for any trace, the Display is set to On for that trace.
1|0|0 (On for Trace 1; Off for Trace 2 and Trace 3)
Saved in instrument state.
A.13.00
Trace/Detector
[:SENSe]:APD:TRACe:ELIMit:RESet
APD:TRAC:ELIM:RES
A.13.00
EMI Receiver Mode Reference