Keysight x-series User Reference Manual page 917

Key Path
Remote Command
Example
Notes
Couplings
Initial S/W Revision
EMI Receiver Mode Reference
FREQ Channel
:CALCulate:APD:SLISt:APPend
CALC:APD:SLIS:APP
If there is no free space in the signal list, you will be prompted by a message that asks whether to
continue or not: WARNING! There is not enough free space in Signal List. Would you like to clear the
Signal list before adding signals? Press ENTER to continue or ESC to Cancel.
If you send the SCPI command when there is no free space in the signal list, the application will just
clear the signal list. The information message is only for key presses.
The newly added signal will become the selected signal in the list.
A.13.00
11 APD Measurement
FREQ Channel
917