Click Rate - Keysight x-series User Reference Manual

12 Disturbance Analyzer Measurement
Meas Setup
Key Path
Remote Command
Example
Dependencies
Couplings
Preset
State Saved
Min
Max
Default Unit
Initial S/W Revision

Click Rate

Specifies the Click Rate for the Lq value.
Key Path
Remote Command
Example
Preset
State Saved
Min
Max
Initial S/W Revision
Key Path
Remote Command
1068
Meas Setup, Setup Table
[:SENSe]:DANalyzer:POWer[:RF]:ATTenuation <rel_amptd>
[:SENSe]:DANalyzer:POWer[:RF]:ATTenuation?
[:SENSe]:DANalyzer:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
[:SENSe]:DANalyzer:POWer[:RF]:ATTenuation:AUTO?
DAN:POW:ATT 10
DAN:POW:ATT?
When external mixing is active, Attenuation is grayed-out.
Attenuation auto value is determined from the formula; Attenuation = Limit + 44dB ( Lq ) + 28dB (
Headroom for peak) + 10dB ( default attenuation value) is to avoid excessive compression.
42 dB
ON
Saved in instrument state.
0 dB
50 dB (CXA)
60 dB (EXA)
70 dB (MXA, PXA & N9038A)
dB
A.14.00
Meas Setup, Setup Table
[:SENSe]:DANalyzer:CRATe: <integer>
[:SENSe]:DANalyzer:CRATe?
DAN:CRAT 10
DAN:CRAT?
0
Saved in instrument state.
1
1000
A.14.00
Meas Setup, Setup Table
[:SENSe]:DANalyzer:CRATe:TYPe MEASured|USER
EMI Receiver Mode Reference