System Idn Response - Keysight x-series User Reference Manual

6 System Functions
System
Example
Preset
State Saved
Range
Initial S/W Revision

System IDN Response

This key allows you to specify a response to the *IDN? query, or to return the analyzer to the Factory
response if you have changed it.
To choose the factory-set response, press the Factory key.
To specify your own response, press the User key, and enter your desired response.
Key Path
Mode
Remote Command
Notes
Preset
State Saved
Initial S/W Revision
Factory
This key selects the factory setting, for example:
"Agilent Technologies,N9020A,MY00012345,A.05.01"
where the fields are manufacturer, model number, serial number, firmware revision.
Key Path
Example
Initial S/W Revision
338
:LXI:IDEN ON
Not part of Preset, but reset to OFF on Restore System Defaults All
No
On | Off
A.12.50
System, I/O Config
All
:SYSTem:IDN <string>
:SYSTem:IDN?
• This affects the response given in all Modes of the Analyzer, unless the current Mode has also
specified a custom response, in which case the current Mode's custom IDN response takes
precedence over the System's, but only while that Mode is the current Mode..
• It survives shutdown and restart of the software and therefore survives a power cycle
• Null string as parameter restores the Factory setting
This is unaffected by Preset but is set to the original factory setting on a "Restore System Defaults-
>Misc"
No
A.06.00
System, I/O Config, IDN Response
:SYST:IDN "" null string, restores the factory setting
A.06.0
EMI Receiver Mode Reference