Navigate - Keysight x-series User Reference Manual

10 Monitor Spectrum Measurement
Meas Setup
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision

Navigate

This menu enables you to navigate through the signal list without using a mouse.
Key Path
Initial S/W Revision
Page Up
If the signal list fills more than one page, pressing this key moves the signal list up by one page.
Key Path
Notes
Couplings
Initial S/W Revision
Page Down
If the signal list fills more than one page, pressing this key moves the signal list down by one page.
Key Path
Notes
Couplings
Status Bits/OPC
Dependencies
Initial S/W Revision
Scroll Left
Scroll the signal list to the left.
780
When the signal list is cleared, this value will reset to 0.
If the signal list is empty, =0
If the signal list is not empty, = number of peaks in signal list table
Saved in instrument state
0
Number of peaks in the signal list table.
A.13.00
Meas Setup, Signal List
A.13.00
Meas Setup, Signal List, Navigate
Front panel only.
Page Up
A.13.00
Meas Setup, Signal List, Navigate
Front panel only.
Page Up
Page Down
A.13.00
EMI Receiver Mode Reference