Preset To - Keysight x-series User Reference Manual

Preset
State Saved
Range
Readback Text
Initial S/W Revision

Preset To

Enable you to choose which EMC Standard you want to Preset to.
Key Path
Remote Command
Example
Preset
State Saved
Range
Readback Text
Initial S/W Revision
Mode IDN Response
Displays the menu keys that enable you to change the return string of the *IDN? query, which will override
the System IDN response. In all cases the default selection is "System IDN Response", which means just
use the response from the system.
The *IDN string is in the format of <Manufacturer>, <Model>, <Serial Number>, <FW Version>. If R&S ESU
or R&S ESL is selected, the IDN string will be in the format of Rohde&Schwarz,<Model>,000000/000,99.99,
where <Model> depends on the instrument maximum frequency.
Mode IDN Freq Option of CXA, MXA, EXA,
Response PXA and MXE
EMI Receiver Mode Reference
to –3 dB.
Choosing a CISPR detector or CISPR presets automatically picks the CISPR Standard, however
switching from a CISPR detector has no impact on EMC Standard.
When EMC Standard set to CISPR, the default detector for meter 1 is Peak, meter 2 is Quasi Peak
and EMI Average is the default detector for meter 3.
When EMC Standard set to MIL, the default detector for meter 1 is Peak, meter 2 is Average and
Negative Peak is the default detector for meter 3.
Reset to the value set in EMC Standard Preset To key.
Saved in instrument state
None|CISPr|MIL
None|CISPR|MIL
A.07.00
Mode Setup, EMC Std
[:SENSe]:EMC:STANdard:PRESet NONE|CISPr|MIL
[:SENSe]:EMC:STANdard:PRESet?
:EMC:STAN:PRES MIL
Not part of Preset, but is reset to CISPR by Restore Mode Defaults; survives a shutdown.
Saved in instrument state
None|CISPR|MIL
None|CISPR|MIL
A.10.00
<Model> field of *IDN string
5 Mode Functions
Mode Setup
247