Keysight x-series User Reference Manual page 307

Key Path
Mode
Remote Command
Example
Notes
State Saved
Key Path
Mode
Remote Command
Example
Notes
State Saved
Key Path
Mode
Remote Command
Example
Notes
State Saved
EMI Receiver Mode Reference
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:RFPSelector:LRADiated?
:CAL:TIME:RFPS:LRAD?
Value is the date and time the last successful Align Now, 30 MHz – 3.6 GHz was executed. The date
is separated from the time by a semi-colon character.
No
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:RFPSelector:LRADiated?
:CAL:TEMP:RFPS:LRAD?
Value is in degrees Centigrade at which the last successful Align Now, 30 MHz – 3.6 GHz was
executed.
No
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:RFPSelector:SCHeduler:TIME:NEXT?
This query returns data using the following format "YYYY/MM/DD; HH:MM:SS"
:CAL:RFPS:SCH:TIME:NEXT?
The next run time will be updated based on the start date/time and recurrence set by the users.
"date" is representation of the date the task will run in the form of "YYYY/MM/DD" where:
−YYYY is the four digit representation of year. (for example, 2009)
−MM is the two digit representation of month. (for example, 01 to 12)
−DD is the two digit representation of the day. (for example, 01 to 28, 29, 30 or 31 depending
on the month and year)
"time" is a representation of the time of day the task will run in the form of "HH:MM:SS" where:
−HH is the two digit representation of the hour in 24 hour format
−MM is the two digit representation of minute
−SS is the two digit representation of seconds
For model N9038A only.
No
6 System Functions
System
307