W
Sets the amplitude unit for the selected amplitude scale (log/lin) to watt.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
V
Sets the amplitude unit for the selected amplitude scale (log/lin) to volt.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
A
Sets the amplitude unit for the selected amplitude scale (log/lin) to Ampere.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
dBµV
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµV.
Key Path
EMI Receiver Mode Reference
AMPTD Y Scale, Y Axis Unit
UNIT:POW W
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
W
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
UNIT:POW V
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
V
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
UNIT:POW A
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
A
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
9 Strip Chart Measurement
AMPTD Y Scale
615