5 Mode Functions
Mode Setup
Key Path
Remote Command
Example
Initial S/W Revision
Current Power (Remote Query Only)
Queries the current power of meters in the currently selected amplitude unit. Returns the minimum data
value if the meter is off.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Peak Power (Remote Query Only)
Query peak power of meters in the currently selected amplitude unit. Returns the minimum data value if
meter is off.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Dwell Time (per point)
Specifies the dwell time for the meter's detectors.
Key Path
Remote Command
Example
Preset
State Saved
Min
252
Remote command only
:CALCulate:METer:LIMit:ALL:FAIL?
CALC:MET:LIM:ALL:FAIL?
A.07.00
Remote command only
:CALCulate:METer:POWer[:CURRent]?
CALC:MET:POW?
This query returns the current power values for all three meters separated by commas.
A.07.00
Remote command only
:CALCulate:METer:POWer:PEAK?
CALC:MET:POW:PEAK?
This query returns peak power values for all three meters separated by commas.
A.07.00
Mode Setup, Meters Control
[:SENSe]:METer:DETector:DWELl <time>
[:SENSe]:METer:DETector:DWELl?
MET:DET:DWEL 500ms
MET:DET:DWEL?
10 ms
Saved in instrument state.
10 ms
EMI Receiver Mode Reference