Signal List - Keysight x-series User Reference Manual

Remote Command
Example
Notes
Preset
State Saved
Range
Readback
Initial S/W Revision

Signal List

This key selects Signal List as the data type to be imported. The next step is to select the Open key in the
Import Data menu. Importing a Signal List always replaces the data with the data that is already in the
signal list.
Key Path
Remote Command
Example
Notes
Status Bits/OPC
dependencies
Initial S/W Revision
Open...
When you press "Open", the analyzer brings up a Windows dialog and a menu entitled "File Open." This
menu allows you to navigate to the various fields in the Windows dialog without using a keyboard or
mouse. The Tab and Arrow keys can also be used for dialog navigation.
See "From File..." on page
Key Path
Notes
Initial S/W Revision
EMI Receiver Mode Reference
:MMEMory:LOAD:LIMit:DDIRectory USER|PRELoaded
:MMEM:LOAD:LIM:DDIR USER Select user
:MMEM:LOAD:LIM:DDIR?
USER = User
PRELoaded = Preloaded
PRELoaded
Saved in instrument state.
User| Preloaded
"User"| "Preloaded"
A.13.00
Recall, Data
:MMEMory:LOAD:ALISt <filename>
MMEM:LOAD:ALIS "myAPDSignalList2.csv" imports the Signal List from the file
myAPDSignalList2.csv in the current path. The default path is My
Documents\EMI\data\APD\SignalList.
If the file is empty, error –250.3005 is reported. If the file does not exist error –256 is reported. If
there is a mismatch between the file and the destination data type, an error is reported. –250.3003.
Then you are returned to the Import Data menu and the File Open dialog goes away.
Sequential - aborts the current measurement
A.13.00
1083in Recall, State, for a full description of this dialog and menu.
Recall, Data
The key location is mode-dependent and will vary.
Brings up Open dialog for recalling a <mode specific> Save Type
Prior to A.02.00
11 APD Measurement
Recall
975