Sweep/Control - Keysight x-series User Reference Manual

10 Monitor Spectrum Measurement

Sweep/Control

Sweep/Control
Displays the menu keys that enable you to control the sweep/control parameters.
Key Path
Initial S/W Revision
Clear List And Restart
This key will perform the following when pressed:
1. Prompt you for confirmation to delete all signals in signal list with the following message:
2. After confirmation, restart the measurement.
Key Path
Remote Command
Example
Initial S/W Revision
864
Front-panel key
A.13.00
Sweep/Control
INITiate:MONitor:CLEar:IMMediate
INIT:MON:CLE:IMM
A.13.00
EMI Receiver Mode Reference