Keysight x-series User Reference Manual page 464

8 Frequency Scan Measurement
Meas Setup
Preset
State Saved
Min
Max
Initial S/W Revision
Log % of Freq
Choose the Step Size to change automatically incremented in % of the current frequency.
Key Path
Example
Dependencies
Couplings
Initial S/W Revision
Key Path
Remote Command
Example
Dependencies
464
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
This key is grayed out during Time Domain Scan.If the grayed out key is pressed, an advisory message
is generated. If the equivalent SCPI command is sent, this same message is generated as part of a "–
221, Settings conflict; Function not available with time domain scan type" warning. During Time
Domain Scan, the value is automatically set to 4. Changing to another Scan Type from Time Domain
to another scan type does not restore the previous value.
2
Saved in instrument state.
1
4
A.07.00
Meas Setup, Scan Table, Auto Step Size Rules
FSC:SCAN:RUL LPCT Selects the Points/RBW Auto Step Rules for range 1.
This key is grayed out when the Scan type is set to Smoothand Time Domain If the grayed out key is
pressed, an advisory message is generated. If the equivalent SCPI command is sent, this same
message is generated as part of a "–221, Settings conflict" warning.
Selecting the Log % of Freq will cause the step size of the selected range to turn into Auto, even if it
was already selected.
A.07.00
Meas Setup, Scan Table, Step Control, Auto Step Size Rules
[:SENSe]:FSCan:SCAN[1]|2|...|10:LPCT <integer>
[:SENSe]:FSCan:SCAN[1]|2|...|10:LPCT?
FSC:SCAN2:LPCT 2 Set the Range 3 to make log scan using 2% of current frequency.
FSC:SCAN2:LPCT?
This key is grayed out when the Scan type is set to Smooth and Time DomainIf the grayed out key is
pressed, an advisory message is generated. If the equivalent SCPI command is sent, this same
message is generated as part of a "–221, Settings conflict" warning.
This key is grayed out during multi range scanning. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict; Function not available while running multirange scan" warning.
This key is grayed out during final measurement. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
EMI Receiver Mode Reference