Keysight x-series User Reference Manual page 641

Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision
EMI Receiver Mode Reference
Marker Function
CALCulate:SCHart:MARKer[1]|2|...12:FUNCtion:ZOOM:CLEar
CALC:SCH:MARK1:FUNC:ZOOM:CLE
You must be in the mode that includes Strip Chart measurement to use this command. Use
INSTrument:SELect to set the mode.
Marker Zoom Out Full key is not available if Marker Zoom was not executed previously.
A.07.00
9 Strip Chart Measurement
Marker Function
641