Scroll Right - Keysight x-series User Reference Manual

Key Path
Notes
Dependencies
Initial S/W Revision

Scroll Right

Scroll the signal list to the right.
Key Path
Notes
Couplings
Status Bits/OPC
Dependencies
Initial S/W Revision
Signal à Meters (Move Meters to Current Signal)
Replace Frequency (Meters) with the frequency of the selected signal.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Mark Signals
This menu enables you to mark signals for further processing. A ticked checkbox appears next to the signal
number to distinguish them from unmarked signals.
Key Path
Initial S/W Revision
Select Signal
Specifies the selected signal. The term "Selected signal" is used throughout this document to specify
which signal will be affected by the functions.
EMI Receiver Mode Reference
Meas Setup, Signal List, Navigate
Front panel only.
Scroll Right
A.13.00
Meas Setup, Signal List, Navigate
Front panel only.
Scroll Right
Scroll Right
A.13.00
Meas Setup, Signal List, Navigate
:CALCulate:SLISt:SET:METer <integer>
CALC:SLIS:SET:MET 12 Set Freq (Meters) to frequency of Signal #12
If the signal list contains no data, an error is generated and this function cannot be performed.
If the selected signal is not in the list, an error is generated and this function cannot be performed.
A.13.00
Meas Setup, Signal List
A.13.00
10 Monitor Spectrum Measurement
Meas Setup
781