Lisn Control (Measure) - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
Off
Pressing this key, turns the demodulation function off.
Key Path
Example
State Saved
Initial S/W Revision

LISN Control (Measure)

This menu enables you to access LISN related functions. LISN control is only available in the MXE with
option LSN, which indicates the availability of IO board. Otherwise, the key will not be shown.
Key Path
Initial S/W Revision
V-network
This key enables you to select the V-network that is controlled via the AUX IO port in a final measurement.
Key Path
Remote Command
Example
Notes
Dependencies
Preset
State Saved
Initial S/W Revision
504
Meas Setup, Analog Demod
:FSC:DEM OFF Turns off demodulation function.
Saved in instrument state.
A.07.00
Meas Setup
A.13.50
Meas Setup, LISN Control
:SENSe1|SENSe2|[SENSe]:FMEasurement:LISN[:TYPE] FOURphase | ESH2Z5 |
ENV216 | OFF
:SENSe1|SENSe2|[SENSe]:FMEasurement:LISN[:TYPE]?
FME:LISN FOUR
FOURPhase and ESH2-Z5:
R&S ESH2-Z5 (four phases and protective earth are controllable)
ENV216:
R&S ENV216 (two phases and highpass are controllable)
OFF:
Remote control deactivated
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
OFF
Saved in instrument state
A.13.50
EMI Receiver Mode Reference