Locate Ip Address Of The Power Device Analyzer; Locate Ip Address Of The E5080A Ena Network Analyzer; Locate Ip Address Of The B2902A Precision Source/Measurement Unit; Locate The Visa Address Of The Intest Hot Plate Controller - Keysight PD1000A Startup Manual

Power device measurement system for advanced modeling

Hide thumbs Also See for PD1000A:

Table of Contents

Step 2: Install System Software on Host PC

Figure 3

Locate IP Address of the Power Device Analyzer

Keysight PD1000A Power Device Measurement System Startup Guide

Keysight IO Libraries Connection Expert Showing VISA Address

1 On the analyzer, press Network > Open Network & Sharing Center > Local Area

Network > Network Connection Details.

2 The IP Address appears in the display.

1 On the E5080A, press the System button on the E5080A front panel.

2 Touch System Setup > LAN Status on the display.

3 The IP Address appears in the LAN Status display.

1 On the B2902A, touch the More button on the lower right of the screen.

2 Touch: I/O > LAN > Status softkeys.

3 The IP Address appears at the bottom of the LAN Status Display.

Since the InTEST Hot Plate controller is a GPIB instrument and not a

standard LAN-connected instrument, the VISA address has the form:

GPIB4::4::INSTR.Use the process described in Appendix A, "Configure the

InTEST Thermal Platform Controller" on page 95.

Table of Contents