Mass Storage Copy (Remote Command Only) - Keysight x-series User Reference Manual

11 APD Measurement
Save

Mass Storage Copy (Remote Command Only)

Key path
Remote Command
Notes
Mass Storage Device Copy (Remote Command Only)
This command transfers data to/from a file and a peripheral device.
Key path
Remote Command
Notes
Mass Storage Delete (Remote Command Only)
Key path
Remote Command
Notes
Initial S/W Revision
Mass Storage Data (Remote Command Only)
Creates a file containing the specified data OR queries the data from an existing file.
998
SCPI Only
:MMEMory:COPY <string>,<string>[,<string>,<string>]
The string must be a valid logical path.
Copies an existing file to a new file or an existing directory to a new directory.
Two forms of parameters are allowed. The first form has two parameters. In this form, the first
parameter specifies the source, and the second parameter specifies the destination.
The second form has four parameters. In this form, the first and third parameters specify the source.
The second and fourth parameters specify the directories. The first pair of parameters specifies the
source. The second pair specifies the destination. An error is generated if the source doesn't exist or
the destination file already exists.
This command will generate an "access denied" error if the destination is a restricted folder (e.g.,
C:\Windows) and the current user does not have Power User or Administrator privileges.
SCPI Only
:MMEMory:COPY:DEVice <source_string>,<dest_string>
The strings must be a valid logical path or a valid device keyword. If the dest_string is a device
keyword, the data is copied from the source file to the device. If the source_string is a device
keyword, the data is copied to the source file from the device.
Valid device keywords are:
SNS (smart noise source)
An error is generated if the file or device is not found.
SCPI Only
:MMEMory:DELete <file_name>[,<directory_name>]
The string must be a valid logical path.
Removes a file from the specified directory. The <file_name> parameter specifies the file name to be
removed. This command will generate an "access denied" error if the file is in a restricted folder (e.g.,
C:\Windows) and the current user does not have Power User or Administrator privileges.
Prior to A.02.00
EMI Receiver Mode Reference