Edit Limit - Keysight x-series User Reference Manual

Edit Limit

Opens the Table Editor for the selected limit line.
Key Path
Initial S/W Revision
Navigate
Lets you move through the table to edit the desired point
Key Path
Notes
Min
Max
Initial S/W Revision
Frequency
Lets you edit the frequency of the current row.
Key Path
Notes
Min
Max
Initial S/W Revision
Amplitude
Lets you edit the Amplitude of the current row.
Key Path
Notes
Min
Max
Initial S/W Revision
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current point. And
becomes the current point The new point is not yet entered into the underlying table, and the data in the
EMI Receiver Mode Reference
Meas Setup
A.13.00
Meas Setup, Limits, Edit
There is no value readback on the key
1
2000
A.13.00
Meas Setup, Limits, Edit
There is no value readback on the key
0
1 THz
A.13.00
Meas Setup, Limits, Edit
There is no value readback on the key
–1000 dBm
1000 dBm
A.13.00
10 Monitor Spectrum Measurement
Meas Setup
797