11 APD Measurement
Recall
State
Most of the functions under this key work the same way in many measurements, so they are documented
in the Utility Functions section. For details about this key, see
Data (Import)
Most of the functions under this key work the same way in many measurements, so they are documented
in the Utility Functions section. For details about this key, see
Amplitude Correction
Most of the functions under this key work the same way in many measurements. For details about this key,
see
"Amplitude Correction " on page
Default Directory
Specifies the default directory used for loading of Amplitude Correction. If user is selected, the default
recall directory is the default (My Documents\amplitudeCorrections) or the last directory you saved the
amplitude correction data to. Otherwise, the default recall directory is My Documents\EMC Limits and
Ampcor\Ampcor, which contains a set of preloaded amplitude correction files in the directory called
Ampcor.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Range
Readback
Initial S/W Revision
Trace
This key selects Trace as the data type to be imported. When pressed a second time, it brings up the Trace
Menu, which lets you select the Trace into which the data will be imported.
The trace file contains "meta" data which describes the state of the analyzer when the trace was exported
(see ). If the meta data in the file does not match the current SA state, the "invalid data indicator" (*) is
displayed.
Key Path
Remote Command
976
1087.
Recall, Export Data, Amplitude Correction
:MMEMory:LOAD:CORRection:DDIRectory USER|PRELoaded
:MMEM:LOAD:CORR:DDIR USER Select user
:MMEM:LOAD:CORR:DDIR?
USER = User
PRELoaded = Preloaded
PRELoaded
Saved in instrument state.
User| Preloaded
"User"| "Preloaded"
A.13.00
Recall, Data
:MMEMory:LOAD:TRACe:DATA TRACE1|TRACE2|TRACE3,<filename>
"State" on page
1081.
"Data (Import)" on page
EMI Receiver Mode Reference
1086.