Couplings
Preset
State Saved
Range
Initial S/W Revision
Meas Preset
This key returns the Meas Local variables in the Disturbance Analyzer measurement to their preset values.
This is the same as sending the SCPI command CONF:DAN.
Key Path
Initial S/W Revision
EMI Receiver Mode Reference
Selecting the ∆ Detector type to be sorted (pressing the key or sending the equivalent SCPI
command) will turn on the Auto Sort state, even if that ∆ Detector type was already selected.
DET1
Saved in instrument state.
Detector 1|Detector 2|Detector 3
A.07.00
Meas Setup
A.14.00
12 Disturbance Analyzer Measurement
Meas Setup
1071